Panasonic KX-NS300 Pc Programming Manual page 233

Name
DTMF Specifies the type of DTMF tone
to be sent out.
Payload Specifies the payload type for
Type DTMF tones using RFC2833.
Programming this parameter is
only necessary if DTMF is set to
Outband (RFC2833).
Remote Place (Location / P2P)
The Shelf, Slot, and Port for each item are displayed for your reference. For details, see Common
Programming Reference Items in 9.1 PBX Configuration—[1-1] Configuration—Slot.
Name
Extension Specifies the extension
Number number of the port.
Extension Specifies the extension
Name name of the port.
Connection Indicates the port status. To
change the status of the
port, click the desired cell in
the column, and then select
INS or OUS for the port.
This option is only available
in On-line mode.
Phone Specifies the type of
Location extension connected to the
port.
MGCP-TLS / Specifies whether to enable
SRTP the MGCP-TLS / SRTP (in
case of KX-NT600 series
with remote connection).
The DSP resource
consumption used by the
SRTP (G.711) is 1.3 times
larger than the RTP (G.711).
9.14 PBX Configuration—[1-1] Configuration—Slot—Port Property—V-IPEXT
Description
Description
Value Range
Inband, Outband
(RFC2833)
96–127
Value Range
Max. 5 digits (consisting
of 0–9)
Max. 20 characters
INS: The port is in
service.
OUS: The port is out of
service.
Fault: The port is not
communicating with the
network.
Local only: The
extension is located on
the same network as the
PBX (standard
configuration).
Remote + Local: The
extension is accessing
the PBX remotely (use
Media Relay Gateway).
Disable, Enable
(Remote only)
Links
Feature Manual
References
5.2.1 IP Proprietary
Telephone (IP-PT)
Feature Manual
References
5.2.1 IP Proprietary
Telephone (IP-PT)
Links
Feature Manual
References
5.2.1 IP Proprietary
Telephone (IP-PT)
Feature Manual
References
5.2.1 IP Proprietary
Telephone (IP-PT)
Feature Manual
References
5.2.1 IP Proprietary
Telephone (IP-PT)
Feature Manual
References
5.2.1 IP Proprietary
Telephone (IP-PT)
PC Programming Manual 233