Panasonic KX-NS300 Pc Programming Manual page 228

9.14 PBX Configuration—[1-1] Configuration—Slot—Port Property—V-IPEXT
9.14 PBX Configuration—[1-1] Configuration—Slot
—Port Property—V-IPEXT
Various settings can be programmed for each virtual IP extension port.
Exporting and Importing IP-PT registration information
You can export/import the extension number, extension name, MAC address of the IP-PT (KX-NT series) in
CSV file format.
IP-PT Registration and De-registration
An IP-PT must be registered to the PBX by programming the PBX and IP-PT before it can be used.
Programming instructions for the PBX are given below.
It is possible to de-register the IP-PT later.
IP-PT Registration, De-registration, and Forced De-registration can be performed only in On-line mode.
Name
Preparation Open 27.1 Network Service—[1] IP Address/Ports—Basic Settings,
and confirm that the IP addresses of the mother board and DSP card,
subnet mask address, and default gateway address are set.
Registration Follow the steps below to register the IP-PT.
1.
2.
3.
4.
5.
228 PC Programming Manual
Connect the IP-PT to be registered to the network and, if
necessary, the power supply.
Click Registration.
A dialogue box will appear. Non-registered (available) extension
numbers and names are displayed on the left.
Highlight numbers and names and click the right arrow to select
them for registration. Click Next.
Click Next.
If the registration is still in progress, the dialogue box will show
"Registration Executing".
If the registration is successful, the dialogue box will show
"Registration Completed". Click Close.
Once the IP-PT is successfully registered, the status of the IP-PT
will update to show "Registered".
Description
Value
Links
Range