Panasonic KX-NS300 Pc Programming Manual page 33

Notice
•
In Off-line mode, changes made in 6.8 Tool—Screen Customise will not be reflected in On-line
mode. This is because these settings are not stored in the system data file (DFSYS).
•
When you load the system data file to the PBX, you must install any required activation keys in On-
line mode. Activation keys are required for mailboxes. Settings such as mailbox passwords will be
cleared if the number of activation keys for mailboxes is insufficient.
Uploading Programmed Settings to the PBX
When programming in Off-line mode, clicking the
and file name for the system data file. This file can then be uploaded to the PBX in On-line mode using the
"File Transfer PC to PBX" utility. For details, refer to 7.2.1 Utility—File—File Transfer PC to PBX.
Notice
•
If the PC running the Off-line Web Maintenance Console is shut down, the Web browser is closed, or
the user logs out, any changes that have not been saved will be lost. Be sure to regularly save data
while programming.
•
When you upload a system setting file to the PBX, all existing settings on the PBX will be overwritten
with the settings in the file, including settings you may not want to change. To change only specific
settings in Off-line mode, follow the procedure below:
1.
Use the "File Transfer PBX to PC" utility in On-line mode to save a file with the PBX's current
settings. For details, refer to 7.2.2 Utility—File—File Transfer PBX to PC.
2.
Use the Open -Offline Mode command in the Programme Launcher to load the PBX system file
in Off-line mode.
For details, refer to Opening an Existing System Data File above.
3.
Perform the desired programming in Off-line mode, and then click the
modified system settings to your PC.
4.
Log in to Web Maintenance Console in On-line mode, and then use the "File Transfer PC to
PBX" utility to upload the modified data to the PBX.
1.2.2.1 Editing and Printing Terminal Labels in Off-line Mode
Follow the procedure below to print key label sheets for use with your system's extensions and DSS
consoles.
1.
In On-line mode, export PBX system data to your PC, and then open the exported data in Off-line mode.
a.
In On-line mode, use the File Transfer PBX to PC utility to save your system's data and settings to
your PC. For details, see 7.2.2 Utility—File—File Transfer PBX to PC.
b. Use the Programme Launcher to open the system data in Off-line mode. For details, see Opening
an Existing System Data File in 1.2.2 PC Programming Using Off-line Mode.
2. In Off-line mode, export the key settings to a CSV file.
a. After logging in to Off-line Web Maintenance Console, access the screen from which key settings will
be exported:
–
For extensions: Setup → PBX Configuration → Extension → Wired Extension → Flexible
Button
–
For DSS consoles: Setup → PBX Configuration → Extension → DSS Console
b. Click Export, specify a location to save the flexible key settings data, and then click OK.
1.2.2 PC Programming Using Off-line Mode
icon will open a save dialogue box. Specify a location
icon to save the
PC Programming Manual 33