Panasonic KX-NS300 Pc Programming Manual page 301

9.35 PBX Configuration—[1-2] Configuration—
Portable Station
Various portable station (PS) settings can be programmed.
PS Registration and De-registration
A PS must be registered to the PBX by programming both the PBX and PS before it can be used.
Programming instructions of the PBX are given below; programming instructions of the PS are found in the
Installation Manual.
It is possible to de-register the PS later.
PS Registration, De-registration, and Forced De-registration can be performed only in On-line mode.
Name
Registration Follow the steps below to register the PS.
1.
2.
3.
De- Follow the steps below to de-register the PS.
registration
1.
2.
3.
4.
Description
Click Registration.
A dialogue box will appear. Non-registered
(available) extension numbers and names
are displayed on the left.
Highlight PBX sites and click the right arrow
to select them for registration. Click Next.
If the registration is still in progress, the
dialogue box will show "Registration
Executing".
If the registration is successful, the dialogue
box will show "Registration Completed". Click
Close.
Once a PS is successfully registered, the
status of the PS will update to show
"Registered".
Click De-registration.
A dialogue box will appear. Registered
extension numbers and names are displayed
on the left.
Highlight numbers and names and click the
right arrow to select them for de-registration.
Click Next.
A dialogue box will appear.
Click Confirm.
If the de-registration is successful, the
dialogue box will show "De-registration
Succeed".
Click Close.
Once the PS is successfully de-registered,
the status of the PS will update to show
"None".
9.35 PBX Configuration—[1-2] Configuration—Portable Station
Value
Links
Range
PC Programming Manual 301