Panasonic KX-NS300 Pc Programming Manual page 478

12.3 PBX Configuration—[4-3] Extension—DSS Console
Name
Dial (for NDSS)
Optional
Parameter
(Ringing Tone
Type Number)
(for Time
Service)
Optional
Parameter
(Ringing Tone
Type Number)
(for Loop CO,
Single CO,
Group CO, ICD
Group, SDN)
Optional
Parameter
(Ringing Tone
Type Number)
(for Call Park)
Ext No. of
Mailbox (for
Two-way
Transfer)
478 PC Programming Manual
Description
Specifies the network extension
number of the extension to be
accessed using Network Direct
Station Selection. Note that only
extension numbers that have
been previously registered in
17.4 PBX Configuration—[9-4]
Private Network—NDSS Key
Table can be specified here.
Specifies the Time Table to be
used for changing time modes in
the Automatic Switching mode.
Specifies the ring tone type.
Specifies the number of the
parking zone a call is to be
parked in when a Call Park
button with Parameter Selection
(for Call Park) on this screen set
to Specific is pressed.
Specifies the number of the
extension whose mailbox will be
used to record conversations
using One-touch Two-way
Transfer. (For example, a
secretary can record a
conversation into the mailbox of
a boss.) If the cell is left empty,
the extension user must specify
the number of an extension each
time.
Value Range
Max. 16 digits
(consisting of 0–9, *, #,
T [Transfer], [ ] [Secret],
P [Pause], and F
[Flash])
1-8
KX-DT300 series
(except KX-DT321)/
KX-T7600 series
(except KX-T7665)/
IP-PT (except
KX-NT265/KX-NT321):
1–30
KX-DT321/
KX-T7665/
KX-NT265/KX-NT321:
1–8 (Even if ring tone
9–30 is selected, ring
tone 1 is heard.)
Other telephones: 1–8
(Even if ring tone 9–30
is selected, ring tone 2
is heard.)
0-99
Max. 5 digits (consisting
of 0–9)
Links
Feature Manual
References
4.3.5.1 Network Direct
Station Selection
(NDSS)
Feature Manual
References
5.1.4 Time Service
Feature Manual
References
2.13.2 Call Park
Feature Manual
References
2.28.3 Voice Mail DPT
(Digital) Integration
3.1.1 Unified
Messaging System
Overview