Panasonic KX-NS300 Pc Programming Manual page 259

Name
Parallel Specifies whether the sub telephone
Telephone (SLT) rings at the same time as the main
Ringing telephone (DPT) for an incoming call.
This setting is only available when Port
Type on this screen is set to S-Hybrid.
DPT Type— Selects the port type.
Type To change the port type of an extension
port, follow the steps below:
1. Set the status of the extension port
to "OUS".
2.
Change the port type of the
extension port, then click Apply.
3.
Set the status of the extension port
to "INS".
When changing the port type of an
extension port for which Wireless XDP
has been set on the 12.1.1 PBX
Configuration—[4-1-1] Extension—Wired
Extension—Extension Settings screen,
the Wireless XDP setting must be
deleted first.
When changing the type of a port for
which one or more SDN buttons are set
(except when changing between PC
Console and Telephone), all SDN
buttons customised for that device will
be deleted. When you attempt to apply
the new settings, a warning message is
displayed showing the slot and port
number for which SDN buttons will be
deleted. If you do not wish to delete SDN
buttons for this port, click Cancel.
9.22 PBX Configuration—[1-1] Configuration—Slot—Port Property—Extension Type
Description Value Range
Yes, No
Normal: For connecting
a DPT or CS
DSS: For connecting a
DSS Console (A
maximum of 8 DSS
Consoles can be
connected to the PBX.)
VM(DPT): For
connecting a
Panasonic VPS
through DPT
Integration
PC Console: For
connecting a PC
Console (A maximum
of 8 PC Consoles can
be connected to the
PBX.)
PC Programming Manual
Links
Feature Manual
References
2.11.10 Parallelled
Telephone
Feature Manual
References
2.28.1 Voice Mail
(VM) Group
2.26.1 Computer
Telephony
Integration (CTI)
259