Panasonic KX-NS300 Pc Programming Manual page 48

2.3 Frequently Asked Questions (FAQ)
A •
Perform the following steps:
1.
Clear the Leading Number cell.
2.
Click Apply.
3.
Set No. of Additional Digits to "None".
4.
Click Apply.
5.
Enter the desired value in the Leading Number cell.
6.
Click Apply.
7.
Set all extension ports to OUS status.
8.
On the relevant screens, set the extension numbers of extensions to the desired values.
9.
Set all extension ports back to INS status.
Q How do I change a feature number?
A •
Perform the following steps:
1.
Open the 10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan—Main screen
and navigate to the Features tab.
2.
Change the value in the Dial cell of the desired feature.
3.
Click Apply.
Q I cannot change a feature number.
A •
It is not possible to use the same number for 2 items.
The number you are trying to store cannot be used if it is already being used by:
–
A feature number
–
An extension
–
A Dial setting (see 17.1 PBX Configuration—[9-1] Private Network—TIE Table)
–
Quick Dialling (see 10.6.2 PBX Configuration—[2-6-2] System—Numbering Plan—Quick
Dial)
In any of these cases, choose another number.
Q How do I change the code used to access another PBX?
A •
Perform the following steps:
1.
Open the 10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan—Main screen.
2.
Select the Other PBX Extension tab.
3.
Change the value in the Dial cell of the desired feature.
4.
Click Apply.
Q I cannot change an Other PBX Extension code.
48 PC Programming Manual