Panasonic KX-NS300 Pc Programming Manual page 619

[From the Custom Service List]
1. Select a custom service sheet.
2. Enter the desired Custom Service number under Quick Search and click Edit Custom Service.
3. Edit the parameters in the Custom Service parameters dialogue box.
4. Click OK.
[From the Custom Service Diagram]
1. Select a custom service sheet.
2. Double-click the desired Custom Service icon in the diagram, or right-click on the desired icon and
select Edit.
3. Edit the parameters in the Custom Service parameters dialogue box.
4.
Click OK.
Example: Setting "Menu & Transfer"
1. Click Menu & Transfer under Custom Service Type and drag it to the right side of the screen.
2. Drop Menu & Transfer on to a position of your choice in the Custom Service diagram. The parameters
dialogue box for the Custom Service opens.
3. Enter or select a value for each item.
For each parameter, refer to the description in the following section.
4. Click Record A Prompt For This Custom Service.
This feature is only available when setting "Menu & Transfer" or "Password". You can also skip this step,
and go to step 7.
5.
Select Record from extension or Import from recorded file.
When Record from extension is selected:
a.
Specify the extension number of the telephone used for recording, then click Connect.
b.
When the specified extension rings, go off-hook.
c.
Click Record, Play, or Stop to record or play a voice label through the extension.
d.
Click Disconnect.
e.
Click OK.
When Import from recorded file is selected:
a.
Click the folder icon.
The Open dialogue box appears.
b.
Navigate to the folder containing the WAV files you want to open.
WAV files must meet the following specifications:
–
G.711 PCM codec
–
8 kHz, 8-bit sampling rate
–
Monaural
–
A-law or µ-law encoding
c.
Select the desired WAV file.
d.
Click Open.
6.
Click OK.
23.3 UM Configuration—[4-3] Service Settings—Custom Service
PC Programming Manual 619