Panasonic KX-NS300 Pc Programming Manual page 505

14.5 PBX Configuration—[6-5] Feature—Absent
Message
When a display PT user calls an extension, a message is shown on the caller's telephone display describing
the reason for absence. A maximum of 8 Absent Messages can be programmed, and any extension user
can select one of them.
Note
When using this feature in conjunction with the Unified Messaging (UM) system, changing a message
here will create a difference between the displayed message and the UM's pre-recorded greeting that
corresponds to the absent message. To use both features in synchronisation, you must record a
corresponding greeting for each absent message changed. For details about changing UM system
prompts, see 7.9 Utility—UM – System Prompts Customisation.
Name
Absent Message
Description
Specifies the message for
display.
14.5 PBX Configuration—[6-5] Feature—Absent Message
Value Range
Max. 16 characters Feature Manual References
2.20.2 Absent Message
Links
PC Programming Manual 505