Name
SVM Cyclic
Specifies the number of times the
Tone Option—
tone pattern (a set of tone-on and
Repeating
tone-off) must be received to
Times of
establish reception of the cyclic tone.
ON/OFF for
This determines the end of call.
Detection
Note that this option can only be set
when SVM Cyclic Tone Detection on
this screen is set to "Option".
SLT Dial "*"
Specifies the SLT dial "*" operation
Operation
mode to avoid wrong DTMF signal
Mode
detection from the SLT. If "Enable" is
selected, you need to dial "*" before
dialling.
13.3.3 PBX Configuration—[5-3-3] Optional Device—Voice Message—SVM
Description
Value Range
3-16
Feature Manual
References
2.16.3 Built-in Simplified
Voice Message (SVM)
Feature Manual
Enable,
Disable
References
2.16.3 Built-in Simplified
Voice Message (SVM)
PC Programming Manual
Links
491