Panasonic KX-NS300 Pc Programming Manual page 171

Name
CNG Signal Effective
Detection Width 1 (ON)
CNG Signal Effective
Detection Width 2 (OFF)
CNG Signal Fixation
Detection Counter
CNG Signal Fixation
Detection Pattern
CED Signal Fixation
Detection Time
CNG Signal Effective
Detection Width 1 (ON) -
SIP Extension
CNG Signal Effective
Detection Width 2 (OFF) -
SIP Extension
CNG Signal Fixation
Detection Counter - SIP
Extension
CNG Signal Fixation
Detection Pattern - SIP
Extension
CED Signal Fixation
Detection Time - SIP
Extension
T38 FAX Transmit Level
(Network to PBX) A-Law
T38 FAX Transmit Level
(Network to PBX) Mu-Law
T38 FAX Transmit Level
A-Law - SIP Extension
9.2.2 PBX Configuration—[1-1] Configuration—Slot—System Property—Site
Description
Specifies the length of time that the PBX
detects the CNG signal.
Specifies the length of time that the PBX
waits until another CNG signal is detected.
Specifies the number of times the CNG
signal must be detected before the PBX
proceeds the fax operation.
Specifies the CNG signal pattern to be
detected before the PBX proceeds the fax
operation.
Specifies the minimum length of time
required for the CED (called station
identification) signal to be detected by the
PBX.
Specifies the length of time that the PBX
detects the CNG signal for SIP extensions.
Specifies the length of time that the PBX
waits until another CNG signal is detected
for SIP extensions.
Specifies the number of times the CNG
signal must be detected before the PBX
proceeds the fax operation for SIP
extensions.
Specifies the CNG signal pattern to be
detected before the PBX proceeds the fax
operation for SIP extensions.
Specifies the minimum length of time
required for the CED (called station
identification) signal to be detected by the
PBX for SIP extensions.
Specifies the transmission level of G3 fax
signals after being converted from T.38
protocol packets, when the codec used is
G.711A.
Specifies the transmission level of G3 fax
signals after being converted from T.38
protocol packets, when the codec used is
G.711Mu.
Specifies the transmission level of G3 fax
signals after being converted from T.38
protocol packets, when the codec used is
G.711A for SIP extensions.
Value
Links
Range
20–5000 ms
20–5000 ms
1–3
OFF, ON
50 × n (n=1–
100) ms
20 × n (n=1–
250) ms
20 × n (n=1–
250) ms
1–3
Off, On
50 × n (n=1–
100) ms
-13–2 dB
-7–8 dB
-13–2 dB
PC Programming Manual 171