Panasonic KX-NS300 Pc Programming Manual page 169

Name
Area ID for Specifies the area ID for the
logical partition Logical Partitioning feature.
P2P Group Specifies the peer-to-peer group of
the site.
P2P Group Indicates the selected peer-to-peer
Name group's name (reference only).
LLDP Packet Specifies whether the PBX notifies
Sending Ability IP-CSs (KX-NS0154 only) to
enable or disable the ability to
send and receive LLDP packets.
IP Terminal Specifies the IP terminal
Registration registration mode for registering IP
Mode telephones to the PBX.
IP-CS Specifies the registration mode for
Registration registering IP-CSs to the PBX.
Mode
SIP over TCP/IP Specifies whether or not to use
(V-SIPGW) *) SIP over TCP/IP protocol for the
site. When this setting is enabled,
SIP trunks cannot use the UDP/IP
protocol.
Note
9.2.2 PBX Configuration—[1-1] Configuration—Slot—System Property—Site
Description
If this setting is changed, the
V-IPGW cards and/or
V-SIPGW cards installed at the
site will be deleted.
Value Range
1 - 16
1–32
P2P Group Name
Disable, Enable
Manual, Full Automatic,
Extension Input
Manual, Full Automatic
Disable, Enable
Links
PC Programming
Manual
References
7.3.5 Utility—Log—
Call Control Log
10.9 PBX
Configuration—[2-9]
System—System
Options—Option 2—
Applying logical
partitioning
Feature Manual
References
2.11.8 Trunk Call
Limitation
Feature Manual
References
5.2.3 Peer-to-Peer
(P2P) Connection
Feature Manual
References
5.2.3 Peer-to-Peer
(P2P) Connection
Installation
Manual
References
5.4.1 Easy Setup
Wizard
PC Programming Manual 169