Panasonic KX-NS300 Pc Programming Manual page 304

9.36 PBX Configuration—[1-3] Configuration—Option
9.36 PBX Configuration—[1-3] Configuration—
Option
System options can be programmed.
Name
System Wireless
—System ID
System Wireless
—CO Status
Display in
Standby
(KX-WT125 only)
(Need System
Restart)
New Card
Installation—Card
Status for any
Card
New Card
Installation—
Automatic
Extension
Number Set for
Extension Card
304 PC Programming Manual
Description
Indicates the radio system ID used to
register a PS (reference only).
To clear the System ID
1. Click the Clear Master CS button.
2. A warning will be displayed.
Confirm the contents of the
warning, and then click Yes.
Note
The System ID can be cleared
using this procedure only in Off-
line mode.
Selects whether to display the CO
status on the LCD of the PS when in
stand-by mode (KX-WT125 only).
Note
•
The KX-WT125 is available
only in Canada.
•
For users in Canada, this
setting is also available for the
KX-WT126.
Selects the initial status of cards after
installation.
Selects whether extension numbers
are assigned to extension ports
automatically or manually.
Value Range
Not applicable.
Enable, Disable
In Service, Out of
Service
Disable, Enable
Links