Panasonic KX-NS300 Pc Programming Manual page 210

9.10 PBX Configuration—[1-1] Configuration—Slot—Port Property—V-SIPGW
Name
Failover
Timer(REGISTER)
Calling Party
The Shelf, Slot, and Port for each item are displayed for your reference. For details, see Common
Programming Reference Items in 9.1 PBX Configuration—[1-1] Configuration—Slot.
Name
Indicates the port status.
To change the status of
Connection
the port, click the desired
cell in the column, and
then select INS or OUS
for the port.
This option is only
available in On-line
mode.
Specifies the header of
Header
the SIP message in
Type
which the caller
information is stored.
Specifies the value to be
From
stored in the username
Header—
part of the SIP-URI of
User Part
the From header.
Specifies the complete
From
SIP-URI address of the
Header—SIP-
From header. The
URI
configuration in From
Header—User Part will
be invalid if this
parameter is set.
Specifies the value to be
stored in the username
P-Preferred-
part of the SIP-URI of
Identity
the P-Preferred-Identity
Header—
header.
User Part
210 PC Programming Manual
Description
Specifies the amount of time to wait for a
response for a REGISTER request.
Note
•
If 0 is specified, failover operation
follows the T1/T2 timer.
•
While monitoring failover with
OPTIONS, the applicable timer setting
is applied to OPTIONS as well.
•
This setting cannot be changed while
the V-SIPGW card is set to INS.
•
This setting cannot be changed when
an additional channel is active.
Description
INS: The port is in service.
OUS: The port is out of service.
Fault: The port is not communicating with the
network.
From Header, P-Preferred-Identity Header
User Name, Authentication ID, PBX-CLIP
Max. 100 characters
User Name, Authentication ID, PBX-CLIP
Value Range
0–30 s
Value Range
Links
Links