Panasonic KX-NS300 Pc Programming Manual page 239

Name
Phone Specifies the type of extension
Location connected to the port.
Panasonic Enable this setting to allow only
SIP Phone P-SIP phones connect to the PBX.
only
Note
P2P Group Specifies the peer-to-peer group.
P2P Group Indicates the selected peer-to-
Name peer group's name (reference
only).
FAX/T.38
The Shelf, Slot, and Port for each item are displayed for your reference. For details, see Common
Programming Reference Items in 9.1 PBX Configuration—[1-1] Configuration—Slot.
9.16 PBX Configuration—[1-1] Configuration—Slot—Port Property—V-SIPEXT
Description
This setting cannot be
changed while Phone
Location is set to Local only.
If Phone Location is set to
Remote + Local, this setting
will be set to Yes (Only)
automatically.
Value Range
Local only: The
extension is located
on the same network
as the PBX (standard
configuration).
Remote + Local: The
extension is
accessing the PBX
remotely (Media
Relay Gateway).
Yes (Only), No
1–32
P2P Group Name
Links
Feature Manual
References
5.2.2 SIP (Session
Initiation Protocol)
Extension
Feature Manual
References
5.2.2.4 Panasonic SIP
Phones (P-SIP)
PC Programming
Manual References
9.2.2 PBX Configuration—
[1-1] Configuration—Slot—
System Property—Site—
Main—P2P Group
Feature Manual
References
5.2.3 Peer-to-Peer (P2P)
Connection
PC Programming
Manual References
9.2.2 PBX Configuration—
[1-1] Configuration—Slot—
System Property—Site—
Main—P2P Group
11.10 PBX Configuration—
[3-10] Group—P2P Group
Feature Manual
References
5.2.3 Peer-to-Peer (P2P)
Connection
PC Programming Manual 239