Panasonic KX-NS300 Pc Programming Manual page 622

23.3.1 UM Configuration—[4-3] Service Settings—Custom Service—Menu & Transfer
Name
Wait for This parameter is only valid when
Second Call Transfer Anytime is set to a
Digit (1-5 s) value other than "No". After the
caller dials a digit (the first digit)
after listening to a Custom
Service menu, the system waits
for a second digit to be dialled.
This gives the caller time to
continue dialling a mailbox
number, extension number, or
PIN. If this time expires without a
second digit being entered, the
system assumes the caller has
selected a Custom Service menu
option and handles the call
according to the digit dialled by
the caller.
No DTMF Determines how calls are
Input handled when callers do not dial
Operation any numbers after listening to the
menu message (most likely
because they are using rotary
telephones) The default setting is
"Operator", which allows the
caller to be automatically
connected to an operator after
the menu message plays back
("Press the desired number, or
stay on the line to be connected
to an operator.").
Key – Any of the 16 operations listed
Assigned below can be assigned to the 0
Operation: through 9,
0–9, *, # telephone keypad. Callers are
able to access these operations
by pressing the corresponding
keys on their telephones.
622 PC Programming Manual
Description
, and # keys on the
Value Range
1–5 s
Trf to Mbx: Allows the caller to
leave messages in a specified
mailbox.
Trf to Ext: Transfers the caller
to a specified extension.
Operator: Connects the caller
to an operator.
Trf to Out: Transfers the caller
to a specified outside telephone
number. Enter the trunk access
number of the PBX then the
destination telephone number.
Exit: Plays the Custom Service
exit prompt and disconnects
the caller.
Prev Menu: Returns the caller
to the previous menu (if there
was a previous menu).
CS: Transfers the caller to the
Custom Service specified here.
Trf to Mbx: Allows the caller to
leave messages in a specified
mailbox.
Trf to Ext: Transfers the caller
to a specified extension.
Operator: Connects the caller
to an operator.
Trf to Out: Transfers the caller
to a specified outside telephone
number. Enter the trunk access
number of the PBX then the
destination telephone number.
Exit: Plays the Custom Service
exit prompt and disconnects
the caller.
Links
Feature Manual
References
3.2.1.15 Custom
Service
Feature Manual
References
3.2.1.15 Custom
Service
Feature Manual
References
3.2.1.15 Custom
Service