Panasonic KX-NS300 Pc Programming Manual page 300

9.34 PBX Configuration—[1-1] Configuration—Slot—Card Property—DOORPHONE Card
9.34 PBX Configuration—[1-1] Configuration—Slot
—Card Property—DOORPHONE Card
The doorphone card's settings can be programmed.
The Shelf, Slot, and Port for each item are displayed for your reference. For details, see Common
Programming Reference Items in 9.1 PBX Configuration—[1-1] Configuration—Slot.
Name
Port Status
For Output - Device
Type
For Sensor - Input
Signal Decision Time
For Sensor - Input
Signal Detection
Reopening Time
300 PC Programming Manual
Description
Specifies the port's status.
This option is only available in On-line
mode.
Selects the type of connected output
device (for output ports only).
Specifies the minimum duration of
continuous input from the triggered
sensor before the PBX recognises the
input and makes a sensor call.
Specifies the length of time after the
sensor has been triggered during which
any further input from the sensor will be
ignored.
Value Range
INS: The port is in service.
OUS: The port is out of
service.
Fault: There is a
communication error.
Ringer, Relay, Door Opener
32 × n (n=2–255) ms
10 × n (n=1–255) s
Links