Panasonic KX-NS300 Pc Programming Manual page 383

Host PBX Access Code
Name
Group Specifies the name of
Name the trunk group for
programming reference.
Host PBX Specifies the feature
Access number used to access
Code 1–10 a trunk from the host
PBX.
Collect Call Reject (for Brazil)
Name
Group Name
Collect Call
Reject (for
Brazil)—Mode
Collect Call
Reject (for
Brazil)—Wait
Time
Collect Call
Reject (for
Brazil)—Flashing
Time
11.1.2 PBX Configuration—[3-1-2] Group—Trunk Group—Local
Access Priority
Trunk groups can be assigned a priority for Idle Line Access. When making a trunk call by Idle Line Access,
the PBX will search trunk groups for an idle trunk according to the priority assigned here.
11.1.2 PBX Configuration—[3-1-2] Group—Trunk Group—Local Access Priority
Description
Description
Specifies the name of the trunk group
for programming reference.
Enables the PBX to automatically reject
collect calls. This setting is only for
users in Brazil.
Selects the length of time that the PBX
waits before sending a flash signal to
reject a collect call. This setting is only
for users in Brazil.
Selects the length of the flash signal
that the PBX sends to reject a collect
call. This setting is only for users in
Brazil.
Value Range
PC Programming Manual
Max. 20
characters
References
18.1 PBX Configuration—[10-1] CO &
Incoming Call—CO Line Settings
Max. 10 digits PC Programming Manual
(consisting of 0–
References
9, *, and #)
18.1 PBX Configuration—[10-1] CO &
Incoming Call—CO Line Settings
Feature Manual References
2.5.4.8 Host PBX Access Code (Access
Code to the Telephone Company from a
Host PBX)
Value Range
Max. 20
characters
Disable, Enable
500 ms, 1000 ms,
1500 ms, 2000
ms
1000 ms, 1500
ms, 2000 ms,
2500 ms
Links
Links
PC Programming
Manual
References
18.1 PBX
Configuration—[10-1]
CO & Incoming Call—
CO Line Settings
PC Programming Manual 383