Panasonic KX-NS300 Pc Programming Manual page 380

11.1 PBX Configuration—[3-1] Group—Trunk Group
11.1 PBX Configuration—[3-1] Group—Trunk Group
11.1.1 PBX Configuration—[3-1-1] Group—Trunk Group—TRG
Settings
Trunks can be organised into trunk groups. The settings of a trunk group are applied to all trunks in the
group. A maximum of 64 trunk groups can be programmed.
For more information on trunk groups, see "5.1.2 Group" in the Feature Manual.
Main
Name
Group Name
COS
Line Hunting
Order
CO-CO
Duration Time
(*60s)
380 PC Programming Manual
Description
Specifies the name of the trunk
group for programming
reference.
Specifies the COS of the trunk
group, applied when making a
call from a trunk to another
trunk with TIE Line Service.
If you wish to prevent such calls
from being made, ensure that
the COS specified here has a
TRS level of "7" assigned for all
relevant time modes in
10.7.1 PBX Configuration—
[2-7-1] System—Class of
Service—COS Settings.
Specifies the trunk hunting
sequence for the trunk group.
The hunting sequence can be
programmed to start from the
lowest or highest numbered
trunks, or to rotate uniformly
among all trunks.
Specifies the length of time that
a trunk-to-trunk call can be
maintained before being
disconnected.
Value Range
Max. 20 PC Programming Manual
characters
References
18.1 PBX Configuration—[10-1] CO
& Incoming Call—CO Line Settings
1–64 PC Programming Manual
References
10.7.1 PBX Configuration—[2-7-1]
System—Class of Service—COS
Settings
18.1 PBX Configuration—[10-1] CO
& Incoming Call—CO Line Settings
Feature Manual References
4.3.1 TIE Line Service
High -> Low, PC Programming Manual
Low -> High,
References
Rotation
18.1 PBX Configuration—[10-1] CO
& Incoming Call—CO Line Settings
Feature Manual References
2.5.5.3 Trunk Access
None, 1–60 PC Programming Manual
(× 60 s)
References
18.1 PBX Configuration—[10-1] CO
& Incoming Call—CO Line Settings
Feature Manual References
2.11.8 Trunk Call Limitation
Links