Panasonic KX-NS300 Pc Programming Manual page 207

Name
User Name
Authentication
ID
Authentication
Password
Register
The Shelf, Slot, and Port for each item are displayed for your reference. For details, see Common
Programming Reference Items in 9.1 PBX Configuration—[1-1] Configuration—Slot.
Name
Connection
Register Ability
Register
Sending Interval
Un-Register
Ability when port
INS
9.10 PBX Configuration—[1-1] Configuration—Slot—Port Property—V-SIPGW
Description
Specifies the user name
(SIP Account) provided by
the SIP provider.
Specifies the authentication
ID required for registration
with the SIP server.
Specifies the authentication
password used for
registration with the SIP
provider.
Description
Indicates the port status. To change the status
of the port, click the desired cell in the column,
and then select INS or OUS for the port.
This option is only available in On-line mode.
Specifies whether to send the REGISTER
message to the SIP server.
Specifies the maximum length of interval time
after which the PBX sends the REGISTER
message.
Specifies whether to unregister the previous
registration and send the REGISTER message
to the SIP server when the port status is set
back to INS.
Value Range
Max. 64 characters
The available characters are those allowed
in RFC3986.
"0"–"9"
"a"–"z"
"A"–"Z"
"-", ".", "_", ":", "/", "?", "#", "[", "]", "@", "!",
"$", "&", "'", "(", ")", "*", "+", ",", ";", "="
Other characters are not allowed.
Max. 64 characters
The available characters are those allowed
in RFC3986.
"0"–"9"
"a"–"z"
"A"–"Z"
"-", ".", "_", ":", "/", "?", "#", "[", "]", "@", "!",
"$", "&", "'", "(", ")", "*", "+", ",", ";", "="
Other characters are not allowed.
Max. 32 characters
The available characters are those allowed
in RFC3986.
"0"–"9"
"a"–"z"
"A"–"Z"
"-", ".", "_", ":", "/", "?", "#", "[", "]", "@", "!",
"$", "&", "'", "(", ")", "*", "+", ",", ";", "="
Other characters are not allowed.
INS: The port is in
service.
OUS: The port is out of
service.
Fault: The port is not
communicating with the
network.
Disable, Enable
10–86400 s
Disable, Enable
Links
Value Range Links
PC Programming Manual 207