Panasonic KX-NS300 Pc Programming Manual page 608

23.1 UM Configuration—[4-1] Service Settings—Caller ID / PIN Call Routing
23.1 UM Configuration—[4-1] Service Settings—
Caller ID / PIN Call Routing
A maximum of 200 Caller ID/PIN numbers can be assigned so that callers are automatically forwarded to a
pre-programmed destination. A different destination can be set for each time mode (day, night, lunch,
break). For Mode, select Caller-ID Mode or PIN Mode from the drop-down list, and then click the
to assign a routing destination. PIN Call Routing is only available when the Call Transfer Anytime of a
Custom Service is set to "PIN".
Wild card input for Caller IDs/PINs
•
The wild card, " ", can be used as a substitute for any numbers in the following ways.
1.
When Caller ID/PIN numbers include one " ":
" " matches any number, regardless of the actual numbers of digits. For example, registering " "
by itself matches all numbers, and registering "201
2.
When Caller ID/PIN numbers include more than one " ":
Each " " matches a single digit. For example, registering "
digit number, and registering "201
Note
•
If Automatic Login or Holiday Service is used, these will take priority over Caller ID Call Routing
settings. Also note that Caller ID Call Routing takes priority over the Trunk Service and Port Service.
•
Received Caller ID/PIN numbers are searched for in each service setting table in order from the first
registered number to last. When programming Caller ID/PIN routing, note the order of registration,
and remember that wild card entries should be entered after any specific routing entries.
Caller-ID Mode
Name
Caller ID No.
(Selection)
Caller ID No.
(Other)
Description
608 PC Programming Manual
Description
Specifies the Caller ID number setting so
that callers are automatically forwarded to
a pre-programmed destination.
Specifies a Caller ID number (or range of
numbers using the wild card, " ") for
callers from a specific number or range of
numbers that are to be automatically
forwarded to a pre-programmed
destination. Only specified if Caller ID No.
(Selection) is set to "Others".
Specifies a name and/or description of the
Caller ID number.
Note
When no data is specified in this
parameter, the caller's name will be
automatically entered here if the
caller's name is received from the
telephone company.
" matches any number that starts with "201".
" matches any 10-digit number that starts with "201".
Value Range
Private, Out of
Area, Long
Distance, Others
0–9, (Max. 20
digits)
Max. 20 characters
button
" matches any 10-
Links
Feature Manual
References
3.2.1.8 Caller ID
Call Routing
Feature Manual
References
3.2.1.8 Caller ID
Call Routing
Feature Manual
References
3.2.1.8 Caller ID
Call Routing