Panasonic KX-NS300 Pc Programming Manual page 251

Name
Extension Specifies the extension number of
Number the port.
Extension Specifies the extension name of
Name the port.
Telephone Specifies the connected device
Type type.
Note
•
This setting cannot be
changed if a device has
already been registered for
the port. De-register the
device set for the port
before changing the setting.
•
To change this setting when
programming in Off-line
mode, and a device is
already registered to the
port, change the setting of
IP Phone Registration ID
(MAC Address) for the port
to "00:00:00:00:00:00", and
then click Apply. The
setting can then be
changed.
Connection Indicates the port status. To
change the status of the port, click
the desired cell in the column, and
then select INS or OUS for the
port.
This option is only available in On-
line mode.
Password Specifies the password used for
registering a SIP phone, S-PS, or
SIP-CS to the PBX. This
parameter can only be modified
when the virtual SIP extension port
is set to OUS.
9.20 PBX Configuration—[1-1] Configuration—Slot—Port Property—V-UTEXT
Description Value Range
Max. 5 digits (consisting of
0–9)
Max. 20 characters
UT: A KX-UT series SIP
phone is connected.
S-PS: A SIP Portable Station
phone is connected.
SIP-CS: A SIP Cell Station is
connected.
Master-CS: A SIP Master
Cell Station is connected.
INS: The port is in service.
OUS: The port is out of
service.
Fault: The port is not
communicating with the
network.
4–16 characters (consisting
of 0–9, a–z, A–Z)
Links
Feature Manual
References
5.2.2 SIP (Session
Initiation Protocol)
Extension
Feature Manual
References
5.2.2 SIP (Session
Initiation Protocol)
Extension
Feature Manual
References
5.2.2 SIP (Session
Initiation Protocol)
Extension
Feature Manual
References
5.2.2 SIP (Session
Initiation Protocol)
Extension
Feature Manual
References
5.2.2 SIP (Session
Initiation Protocol)
Extension
PC Programming Manual 251