Panasonic KX-NS300 Pc Programming Manual page 620

23.3.1 UM Configuration—[4-3] Service Settings—Custom Service—Menu & Transfer
7. Click OK.
23.3.1 UM Configuration—[4-3] Service Settings—Custom
Service—Menu & Transfer
The below parameters are set for the Menu Transfer Custom Service in the Custom Service Builder.
This Custom Service type guides callers to press certain buttons to connect themselves with the designated
party. The prompt for this service can be recorded in the CS No. dialogue box.
Custom Service prompts can be recorded only in On-line mode.
Name
Description The information typed in this field
is for reference only.
Prompt Specifies the language for
Mode prompts used by this Custom
Service.
Note
Menu Specifies the number of times the
Repeat Custom Service menu message
Cycle (1-3) will be repeated for the caller.
620 PC Programming Manual
Description
•
This parameter overrides a
set "Incoming Call Service
Prompt".
•
If "Primary" is selected, the
default language which is
selected from all installed
languages will be used.
•
If "None" is selected, the
prompt mode of previous
process will be continued,
or "Primary" language will
be selected.
Value Range
Max. 32 characters
None, Primary, Guidance No.
1-8
1–3 times
Links
Feature Manual
References
3.2.1.15 Custom
Service
PC
Programming
Manual
References
22.1 UM
Configuration—
[3-1] UM
Extension / Trunk
Service—Service
Group—Day,
Night, Lunch, and
Break Mode -
Incoming Call
Service Prompt
Feature Manual
References
3.2.1.15 Custom
Service
Feature Manual
References
3.2.1.15 Custom
Service