Panasonic KX-NS300 Pc Programming Manual page 69

Hybrid ip-pbx
Hide thumbs Also See for KX-NS300:
Table of Contents

Advertisement

5.2 System Control—MOH
5.2.1 System Control—MOH—Install
Sound files on the programmer's PC can be installed to each PBX for use as Music on Hold (MOH).
This screen can be accessed only in On-line mode.
1.
Click Browse and select a WAV file to install as an MOH file. Only one file may be installed at a time.
2.
As uploading the file to the PBX may require some time, a time can be set in Time Set.
3.
In BGM No., specify which BGM number the MOH file will occupy.
4.
Click Execute to confirm the settings. If "Now" is set for Time Set, the installation will begin at this
time.
Note
Only WAV files can be installed, and file names must not exceed 57 characters in length (including
the file extension ".wav"). Only use ASCII characters in file names.
Files may not be larger than 40 MB in size.
User (User) level accounts cannot perform this procedure.
A WAV file is pre-installed as BGM 1. When a new WAV file is installed to BGM 1, the pre-installed file
will be overwritten. If you need the pre-installed file in the future, backup the file before installing a
new file. For details, see 5.2.3 System Control—MOH—Status / Backup.
5.2.2 System Control—MOH—Delete
MOH files that are occupying BGM numbers can be deleted.
This screen can be accessed only in On-line mode.
1.
In BGM No., specify the BGM numbers to delete MOH files from. Specify "All" to delete the data saved
in all BGM numbers.
2.
Click Execute to delete the files of the specified BGM numbers.
Note
User (User) level accounts cannot perform this procedure.
5.2.3 System Control—MOH—Status / Backup
MOH files stored on a PBX can be downloaded to the user's PC.
This screen can be accessed only in On-line mode.
1.
The MOH files saved to the PBX will be listed. Click Backup for the file you would like to back up. One
file can be backed up at a time.
2.
A save file dialogue will appear. Specify the directory on the PC to back up the file to.
3.
Click OK when finished.
Note
Remained Capacity Time indicates the amount of time available for new MOH files to be added. The
amount of time of any MOH files scheduled to be uploaded in 5.2.1 System Control—MOH—Install
is not reflected in this value.
User (User) level accounts cannot perform this procedure.
5.2 System Control—MOH
PC Programming Manual
69

Advertisement

Table of Contents
loading

Table of Contents