Panasonic KX-NS300 Pc Programming Manual page 671

Hybrid ip-pbx
Hide thumbs Also See for KX-NS300:
Table of Contents

Advertisement

27.3.6 Network Service—[3-6] Client Feature—SMTP
Settings for SMTP for sending e-mail for PBX functions can be programmed.
Name
Mail sender information
name
Mail address
SMTP server for relay—
SMTP server address—IP
Address
SMTP server for relay—
SMTP server address—
Name
SMTP server for relay—
SMTP server Port number
SMTP server for relay—
SMTP over TLS
SMTP Authentication—
SMTP Authentication
SMTP Authentication—
User Name
SMTP Authentication—
Password
POP Before SMTP—POP
before SMTP
POP Before SMTP—POP
server address—IP
Address
POP Before SMTP—POP
server address—Name
POP Before SMTP—POP
server Port number
POP Before SMTP—User
Name
Description
Specifies the name to be used as the
sender of the e-mails from the PBX.
Specifies the sending e-mail address for
messages sent from the PBX. This
address, for example, could be set as
the e-mail address of an administrator.
Specifies the IP address of the SMTP
server to be used to send e-mails.
Specifies the host name of the SMTP
server to be used to send e-mails.
Specifies the port number of the SMTP
server to be used to send e-mails.
Specifies whether the SMTP server uses
Transport Layer Security.
Specifies whether authentication on the
SMTP server is enabled.
Specifies the user name required to
access the SMTP server.
Specifies the password required to
access the SMTP server.
Specifies whether POP before SMTP is
enabled on the SMTP server.
Specifies the IP address of the POP
server when POP before SMTP is
enabled.
Specifies the host name of the POP
server when POP before SMTP is
enabled.
Specifies the port number of the POP
server when POP before SMTP is
enabled.
Specifies the user name for the POP
server when POP before SMTP is
enabled.
27.3.6 Network Service—[3-6] Client Feature—SMTP
Value Range
Max. 64 characters
Max. 128 characters
1.0.0.0–
223.255.255.255
Max. 128 characters
1-65535
Enable, Disable
Note
When Enable is
selected, the
encryption method
used is
STARTTLS.
Enable, Disable
Max. 64 characters
Max. 64 characters
Enable, Disable
1.0.0.0–
223.255.255.255
Max. 128 characters
1-65535
Max. 64 characters
Links
PC Programming Manual
671

Advertisement

Table of Contents
loading

Table of Contents