Panasonic KX-NS300 Pc Programming Manual page 208

9.10 PBX Configuration—[1-1] Configuration—Slot—Port Property—V-SIPGW
Name
Registrar
Server Name
Registrar
Server IP Address
Registrar
Server IP Address
for Failover
Registrar
Server Port
Number
Register
Resending Interval
(s)
NAT
The Shelf, Slot, and Port for each item are displayed for your reference. For details, see Common
Programming Reference Items in 9.1 PBX Configuration—[1-1] Configuration—Slot.
Name
Connection
NAT
Traversal Table
STUN Server
—Name
STUN Server
—IP Address
STUN Server
Port Number
208 PC Programming Manual
Description
Specifies the domain name of the SIP server.
Specifies the IP address of the SIP server. This
setting is compulsory when a register IP
address is provided.
Specifies the IP address of the SIP registrar
server for failover.
Note
Specify the IP address of the outbound
registrar server for failover, if provided by
the SIP provider. This setting cannot be
changed while the V-SIPGW card is set to
INS.
Specifies the port number of the SIP server.
Specifies the interval time for resending the
REGISTER message.
Description
Indicates the port status. To change the status
of the port, click the desired cell in the column,
and then select INS or OUS for the port.
This option is only available in On-line mode.
Selects the NAT traversal configuration to apply
to the port. For details about NAT traversal
settings, see 9.8 PBX Configuration—[1-1]
Configuration—Slot—Shelf Property—
V-SIPGW—NAT Traversal 1-8.
Specifies the domain name of a STUN server.
Specifies the IP address of the STUN server.
This setting is compulsory when the STUN
method is selected and a DNS server is not
used.
Specifies the port number of the STUN server.
Value Range
Max. 100 characters
1.0.0.0–
223.255.255.255
1.0.0.0–
223.255.255.255
1–65535
0-65535 s
Value Range
INS: The port is in service.
OUS: The port is out of
service.
Fault: The port is not
communicating with the
network.
None, 1-8
Max. 100 characters
1.0.0.0–223.255.255.255
1–65535
Links
Links