Panasonic KX-NS300 Pc Programming Manual page 290

9.29 PBX Configuration—[1-1] Configuration—Slot—Card Property—E1 type Line Signal Setting
Name
DSP Gain
Adjustment—MFC-
R2 Transmit
DSP Gain
Adjustment—MFC-
R2 Receive
Frame Error
Detection—Error
Detection
Frame Error
Detection—Error
Rate
290 PC Programming Manual
Description
Specifies the output power of MFC-R2
signals sent from the DSP.
Specifies the strength range within which
an MFC-R2 signal must be for the DSP
to recognise it as an MFC-R2 signal.
Specifies whether the PBX detects
frame synchronisation errors.
Specifies the number of frame errors per
second which the PBX needs to
recognise a remote alarm. To enable this
setting, Frame Error Detection—Error
Detection on this screen should be set
to Yes.
Value Range
-31 dB–0 dB
-38 - 0 dB – -23 - 0
dB
No, Yes
No limit, 16 x n (n=1–
7) errors/s
Links