Pc Programming Manual References; Feature Manual References - Panasonic KX-NS300 Pc Programming Manual

17.2 PBX Configuration—[9-2] Private Network—Network Data Transmission
17.2 PBX Configuration—[9-2] Private Network—
Network Data Transmission
Settings related to the transmission of extension BLF (Busy Line Field) data or Message Waiting
notifications over a network of PBXs can be programmed.
Extension BLF data is used to show the status of a monitored extension attached to another PBX on a
Network DSS (NDSS) button. Network Message Waiting notifications are used for the Centralised VM
feature, and a voice mail system can send notifications to extensions connected to any PBX in the network.
Name
Network Data
Transmission for
Centralised
Operator Feature—
Network PBX ID
Network Data
Transmission for
Centralised
Operator Feature—
Data Transmission
VoIP->ISDN
530 PC Programming Manual
Description
Specifies the Network ID of the
PBX, for Network Direct
Station Selection (NDSS). This
parameter must be set in
correspondence with the
Network IDs assigned to other
PBXs in the network.
Network IDs 1-8 can only be
assigned to one PBX each
within a network. Assigning the
same Network ID to two PBXs
will cause network data
transmission problems.
Changing this value in On-line
mode will automatically clear
any NDSS Link Data.
Selects whether to re-send
BLF data received from a VoIP
port through any ISDN ports
that are set to transmit BLF
data.
Value Range
0: The PBX Feature Manual
retransmits
References
BLF data sent
4.3.5.1 Network Direct Station
by other
Selection (NDSS)
PBXs.
1: The PBX
receives BLF
data sent by
other PBXs.
2–8: The PBX
transmits BLF
data over the
network.
Disable, PC Programming Manual
Enable
References
9.26 PBX Configuration—[1-1]
Configuration—Slot—Port
Property - BRI Port—ISDN CO
—Networking Data Transfer
9.27 PBX Configuration—[1-1]
Configuration—Slot—Port
Property - PRI Port—CO
Setting—Networking Data
Transfer
Feature Manual
References
4.3.5.1 Network Direct Station
Selection (NDSS)
Links