Panasonic KX-NS300 Pc Programming Manual page 345

Name
Use Quick Dial
for CO
rerouting during
"Break" Mode.
Use quick dial
for rerouting to
public CO when
TIE line does
not work.
Dial
Phone Number
10.6.3 PBX Configuration—[2-6-3] System—Numbering Plan—
B/NA DND Call Feature
Feature numbers used to access various PBX features can be programmed. The following features are
available while hearing a busy, DND, or ringback tone. Each feature must have a unique feature number.
For more information on flexible numbering, see "5.5.7 Flexible Numbering/Fixed Numbering" in the Feature
Manual.
10.6.3 PBX Configuration—[2-6-3] System—Numbering Plan—B/NA DND Call Feature
Description
Specifies whether Quick Dialling
can be used to make a trunk call
via an extension registered at
another site in a One-look
network, when the Time Service
mode is Break mode.
Specifies whether Quick Dialling
can be used for rerouting to a
public trunk when a TIE line is
not operating.
Specifies the Quick Dialling
number.
Specifies the number to be
dialled when the corresponding
Quick Dialling number is used.
Value Range
On, Off
On, Off
1–4000: Max. 8
digits (consisting of
0–9, *, and #)
Max. 32 digits
(consisting of 0–9,
*, #, T [Transfer], [ ]
[Secret], P [Pause],
and F [Flash])
Links
Feature Manual
References
2.6.5 Quick Dialling
5.1.4 Time Service
Feature Manual
References
2.6.5 Quick Dialling
Feature Manual
References
2.6.5 Quick Dialling
4.3.2 Voice over Internet
Protocol (VoIP) Network
5.5.7 Flexible Numbering/
Fixed Numbering
Feature Manual
References
2.6.5 Quick Dialling
4.3.2 Voice over Internet
Protocol (VoIP) Network
5.5.7 Flexible Numbering/
Fixed Numbering
PC Programming Manual 345