Panasonic KX-NS300 Pc Programming Manual page 438

12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings
Option 8
Name
Extension Specifies the extension number of the
Number extension.
Extension Specifies the name of the extension.
Name
Group CW Enables an incoming call to an incoming call
w/o Tone distribution group to arrive at a previously
(Ring after busy extension at the moment that the
Call) extension goes on-hook for the previous call.
Extension Enables the extension to send Caller ID
Caller ID information.
Sending
Note
Incoming Specifies the length of time that the ringing
Call Wait for a call is delayed when the call follows
Timer for immediately after the previous unanswered
Extension call. When receiving two calls in quick
Caller ID succession (e.g., when a call waiting in a
queue is directed to an extension
immediately after the previous unanswered
call stops ringing), some SLTs require a
pause, after the first call stops ringing, to
receive the second call's Caller ID
information.
Note
SLT MW Enables the use of the Message Waiting
Mode Lamp on an SLT extension connected to the
extension port.
Note
438 PC Programming Manual
Description
This setting is available only when Port
Type is set to one of the following.
SLT/S-Hybrid/S-Hybrid(S-DPT)/S-
Hybrid(SLT)
This setting is available only when Port
Type is set to one of the following.
SLT/S-Hybrid/S-Hybrid(S-DPT)/S-
Hybrid(SLT)
This setting must be disabled for
Message Waiting by FSK.
Value Range
Max. 5 digits
(consisting of
0–9)
Max. 20
characters
Disable,
Enable
Feature Manual
Disable,
Enable
References
2.19.1 Caller ID
0–15 s Feature Manual
References
2.19.1 Caller ID
Feature Manual
Disable, MW-
Lamp
References
2.20.1 Message Waiting
Links