Panasonic KX-NS300 Pc Programming Manual page 434

12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings
Name
Charge Limit Specifies the maximum limit of
call charges allowed for the
extension. When this limit is
reached, the extension cannot
be used to make further trunk
calls.
The number of decimal places
that can be specified here
depends on the value set in
Charge Options—Digits After
Decimal Point in 14.2 PBX
Configuration—[6-2] Feature—
Hotel & Charge.
Intercom Selects the method of receiving
Call by Voice intercom calls. When Deny
Voice Call is selected, the
extension will always ring when
receiving calls, regardless of
how the caller wants to make the
call.
Option 4
Name
Extension Specifies the extension
Number number of the extension.
Extension Specifies the name of the
Name extension.
Outgoing Selects the line to be
Preferred seized after going off-
Line hook to make a call.
434 PC Programming Manual
Description
Description
Max. 5 digits (consisting of 0–9)
Max. 20 characters
No Line: No line is seized.
Idle: An idle trunk is seized
automatically from the
programmed trunk groups.
ICM/PDN: An extension line is
seized, or, for a PDN extension,
an idle PDN button is selected.
F-1–F-84: A trunk programmed
for a flexible button (F-1–F-84) is
seized. A flexible button
customised as a Single-CO,
Group-CO, Loop-CO, or ICD
Group button must be selected.
Value Range
0–9999999
Tone Call, Voice Call, Deny
Voice Call
Value Range
Links
PC Programming
Manual References
14.2 PBX
Configuration—[6-2]
Feature—Hotel &
Charge
Feature Manual
References
2.7.2 Budget
Management
Feature Manual
References
2.5.3 Intercom Call
Links
PC Programming
Manual References
12.1.4 PBX
Configuration—[4-1-4]
Extension—Wired
Extension—Flexible
Button
Feature Manual
References
2.5.5.2 Line Preference
—Outgoing