Panasonic KX-NS300 Pc Programming Manual page 344

10.6.2 PBX Configuration—[2-6-2] System—Numbering Plan—Quick Dial
Name
Dial Indicates the DTMF tone dial
required by the PBX to recognise it
and dial the pre-programmed
number for each key (reference
only).
Message Specifies the feature number or
Key— telephone number dialled when the
Phone MESSAGE key on the KX-T7710 is
Number pressed. By default, this is set to
the feature number used to call
back a caller who left a message
waiting indication, Message
Waiting Set / Cancel / Call Back.
This is available only when the
position of the Mode switch lever on
the KX-T7710 is set to "PBX".
One-touch Specifies the number dialled when
Dial 01–08 a one-touch key on the KX-T7710
—Phone is pressed.
Number This is available only when the
position of the Mode switch lever on
the KX-T7710 is set to "PBX".
10.6.2 PBX Configuration—[2-6-2] System—Numbering Plan—
Quick Dial
Quick Dialling numbers are used to call extensions or outside parties, or access certain features without
having to dial their full numbers. It is possible to register Quick Dialling numbers that overlap with other
registered numbers (refer to "Automatic Rerouting of VoIP Calls to Public Trunks" in the Feature Manual).
For more information on flexible numbering, see "5.5.7 Flexible Numbering/Fixed Numbering" in the Feature
Manual.
344 PC Programming Manual
Description Value Range
B: For MESSAGE Key
A1: For One-touch Dial 01
Key
A2: For One-touch Dial 02
Key
A3: For One-touch Dial 03
Key
A4: For One-touch Dial 04
Key
A5: For One-touch Dial 05
Key
A6: For One-touch Dial 06
Key
A7: For One-touch Dial 07
Key
A8: For One-touch Dial 08
Key
Max. 32 digits (consisting of
0–9, *, #, T [Transfer], [ ]
[Secret], P [Pause], and F
[Flash])
Max. 32 digits (consisting of
0–9, *, #, T [Transfer], [ ]
[Secret], P [Pause], and F
[Flash])
Links
PC Programming
Manual
References
10.6.1 PBX
Configuration—
[2-6-1] System—
Numbering Plan—
Main—Features—
Message Waiting
Set / Cancel / Call
Back