Panasonic KX-NS300 Pc Programming Manual page 520

16.3 PBX Configuration—[8-3] ARS—Routing Plan Time
16.3 PBX Configuration—[8-3] ARS—Routing Plan
Time
The start and end times of a maximum of 4 different time blocks are shown for each day of the week. There
are 48 Routing Plan Tables, and each Routing Plan Table can have its own time blocks. Select the desired
Routing Plan Table number from the Routing Plan list.
•
To adjust the currently displayed Routing Plan, click and drag the divisions between two time periods.
•
To programme the time blocks of the currently displayed Routing Plan, including adding or deleting time
blocks, click Time Setting.
16.3.1 PBX Configuration—[8-3] ARS—Routing Plan Time—Time
Setting
The start times of a maximum of 4 different time blocks can be programmed for each day of the week, for
the selected Routing Plan. Each time block automatically ends when the subsequent block begins.
Name
Time-A–D— Enables the setting of the start time for each time
Setting block.
Time-A–D— Specifies the start time for each time block.
Hour,
Note
Minute
520 PC Programming Manual
Description
Time-A must be the earliest block in the day,
and the following blocks must be set in
chronological order.
Correct programming example:
Time-A: 8:00
Time-B: 17:00
Time-C: 21:00
Incorrect programming example:
Time-A: 8:00
Time-B: 13:00
Time-C: 11:30
Time-D: 17:00
Value
Links
Range
Feature Manual
Disable,
Enable
References
2.8.1 Automatic
Route Selection
(ARS)
00:00– Feature Manual
23:59
References
2.8.1 Automatic
Route Selection
(ARS)