Panasonic KX-NS300 Pc Programming Manual page 322

Hybrid ip-pbx
Hide thumbs Also See for KX-NS300:
Table of Contents

Advertisement

10.3 PBX Configuration—[2-3] System—Timers & Counters
Name
Extension PIN—Lock
Counter
External Sensor—
Ring Duration (s)
Incoming Call Inter-
digit Timer—DDI /
DID (s)
Incoming Call Inter-
digit Timer—TIE (s)
PT Display—PT Last
Display Duration in
Idle Mode (s)
Air Synchronisation
—Watching
Degeneracy (x60s)
Voice Mail (Caller
from VM to CO)—
On-hook Wait Time
(s)
322
PC Programming Manual
Description
Specifies the number of successive
incorrect PIN entries allowed before
the extension PIN is locked. A
locked extension PIN cannot be
used until reset from the extension
assigned as manager. (Specifying
"None" disables this counter.)
Specifies the length of time that the
PBX waits for the called party to
answer before cancelling a sensor
call.
Specifies the length of time between
digits when receiving a DDI/DID
number from a public network. The
call will be redirected to a PBX
operator when this timer expires.
Specifies the length of time between
digits when receiving a dialled
number from a TIE line. The call will
be redirected to a PBX operator
when this timer expires.
Specifies the length of time that the
current information remains on the
display after the extension returns to
idle status.
Specifies the length of time that a
Slave CS can maintain an ongoing
call after air synchronisation is lost.
Specifies the length of time from
when the voice mail seizes a trunk
(for example, to transfer a call) until
the voice mail goes on hook. If the
time specified here is too short, the
voice mail will be unable to dial the
number and make a connection.
Value
Range
None, 1–
Feature Manual
15
References
2.7.5 Walking COS
2.7.6 Verification Code Entry
2.24.1 Extension Personal
Identification Number (PIN)
Feature Manual
10 × n
(n=1–15)
References
s
2.18.3 External Sensor
PC Programming
0–30 s
Manual References
18.3 PBX Configuration—
[10-3] CO & Incoming Call—
DDI / DID Table
Feature Manual
References
2.1.1.3 Direct Inward Dialling
(DID)/Direct Dialling In (DDI)
3–30 s
PC Programming
Manual References
17.1 PBX Configuration—
[9-1] Private Network—TIE
Table
Feature Manual
References
4.3.1 TIE Line Service
1–15 s
PC Programming
60 × n
(n=0–
Manual References
300) s
19.3.1 PBX Configuration—
[11-3-1] Maintenance—CS
Synchronisation—Air
Synchronisation
1–30 s
Feature Manual
References
3.1.1 Unified Messaging
System Overview
Links

Advertisement

Table of Contents
loading

Table of Contents