Panasonic KX-NS300 Pc Programming Manual page 307

9.38 PBX Configuration—[1-5] Configuration—DSP
Resource
IP communications that are handled by the PBX require DSP resources. DSP resources can be reserved for
various functions of the PBX.
The DSP resource advisor is a tool that analyses the configuration and user requirements for the system in
order to recommend which DSP card should be used. Click DSP Resource Advisor to access this feature.
(See 9.38.1.1 PBX Configuration—[1-5-1] Configuration—DSP Resource—Setting—DSP Resource
Advisor.)
9.38.1 PBX Configuration—[1-5-1] Configuration—DSP Resource
—Setting
Set the amount of DSP resources to reserve for each PBX function that uses DSP resources.
Name
Option DSP
Power
Option DSP
Services—
VoIP (G.711)
Services—
Unified
message
Description
Indicates the total amount of
available DSP resources based on
the installed DSP card (reference
only).
The number of resources provided
by each type of DSP card is as
follows:
•
DSP S card: 63
•
DSP M card: 127
•
DSP L card: 254
One DSP card can be installed on
the mother board.
Because the system reserves 2
resources for internal system
functions, the total amount of
available resources indicated will be
2 less than the total resources of the
installed card(s).
Indicates the type of the installed
DSP card (reference only).
Specifies the number of
simultaneous VoIP calls to reserve
DSP resources for.
Specifies the number of UM ports to
reserve DSP resources for.
9.38 PBX Configuration—[1-5] Configuration—DSP Resource
Value Range
Resource amount (3
digits)
DSP S, DSP M, DSP L
DSP S (as a Slave unit in
a One-look network)
0–252 VoIP calls
0–61 VoIP calls (as a
Slave unit in a One-look
network)
0–24 ports
Links
Feature Manual
References
5.5.4 DSP
Resource Usage
Feature Manual
References
5.5.4 DSP
Resource Usage
Feature Manual
References
5.5.4 DSP
Resource Usage
Feature Manual
References
5.5.4 DSP
Resource Usage
PC Programming Manual 307