Panasonic KX-NS300 Pc Programming Manual page 539

Name
Trunk Property
Distribution
Method
CLI Ring for
DIL—Day,
Lunch, Break,
Night
DDI / DID / TIE / MSN
For each trunk to which DDI/DID distribution is set, or for each trunk whose Trunk Property on this screen
is Private (TIE), modification parameters for DDI/DID number and TIE line call numbers can be
programmed.
The Shelf, Slot, and Port for each item are displayed for your reference. For details, see Common
Programming Reference Items in 9.1 PBX Configuration—[1-1] Configuration—Slot.
Name
Card Type
Trunk
Property
18.2 PBX Configuration—[10-2] CO & Incoming Call—DIL Table & Port Settings
Description
Indicates the networking
type of each trunk
(reference only).
Selects the distribution
method for incoming trunk
calls. The value range of
this setting depends on the
card type and Trunk
Property assigned for
each trunk.
Enables CLI distribution in
each time mode.
Description
Indicates the trunk card
type (reference only).
Indicates the networking
type of each trunk
(reference only).
Value Range
Public, Private(TIE),
VPN
DIL: Distribution
depends on the trunk
through which the calls
arrive
DDI/DID: Distribution
depends on the
DDI/DID number of the
calls
MSN: Distribution
depends on the MSN of
the calls
Disable, Enable
Value Range
Card type
Public, Private(TIE),
VPN
Links
Feature Manual
References
2.1.1.1 Incoming Trunk Call
Features—SUMMARY
4.3.1 TIE Line Service
4.3.3 ISDN Virtual Private
Network (ISDN-VPN)
Feature Manual
References
2.1.1.1 Incoming Trunk Call
Features—SUMMARY
Feature Manual
References
2.1.1.2 Direct In Line (DIL)
2.1.1.5 Calling Line
Identification (CLI)
Distribution
Links
Feature Manual References
2.1.1.1 Incoming Trunk Call
Features—SUMMARY
Feature Manual References
2.1.1.1 Incoming Trunk Call
Features—SUMMARY
4.3.1 TIE Line Service
4.3.3 ISDN Virtual Private
Network (ISDN-VPN)
PC Programming Manual 539