Panasonic KX-NS300 Pc Programming Manual page 385

Name
Added Number
Length of Digits
The PBX adds a certain number of digits to the caller's number depending on the length of digits, as
programmed in the Length of Digits Modification Tables assigned to the trunk group. This modification is
applied to incoming trunk calls routed through public networks when the type of network numbering plan is
Unknown or not specified.
A maximum of 4 Length of Digits Modification Tables can be programmed. Select the desired table from the
Modification Table list.
If the length of digits of an incoming trunk call is less than the Minimum Caller ID Digits (for National), the
caller's number is not modified.
Name
Minimum Caller
ID Digits (for
International)
Minimum Caller
ID Digits (for
National)
Added Number
(for International)
Added Number
(for National)
CLIP
When incoming caller information is sent through an ISDN line and the type of the network numbering plan
is International, National, or Subscriber, the caller's number can be modified as programmed in the
Modification Tables assigned to the trunk group. The modified number will then be recorded, and it is used
for sending to the network as a CLIP number.
11.1.3 PBX Configuration—[3-1-3] Group—Trunk Group—Caller ID Modification
Description
Specifies the number to
be added to the
incoming caller's number
in the place of the
removed digits.
Description
Specifies the minimum number of digits
required in the caller's number for it to be
recognised as an international call. The value
specified here must be larger than Minimum
Caller ID Digits (for National).
Specifies the minimum number of digits
required in the caller's number for it to be
recognised as a national call. The value
specified here must be smaller than
Minimum Caller ID Digits (for
International).
Specifies the number to be added to the
incoming telephone number when the total
number of digits exceeds Minimum Caller ID
Digits (for International).
Specifies the number to be added to the
incoming telephone number when the total
number of digits exceeds Minimum Caller ID
Digits (for National) but does not exceed
Minimum Caller ID Digits (for
International).
Value Range
Max. 4 digits PC Programming Manual
(consisting of 0–
References
9, *, and #)
11.1.1 PBX Configuration—[3-1-1]
Group—Trunk Group—TRG Settings
—Caller ID Modification Table
14.1 PBX Configuration—[6-1]
Feature—System Speed Dial
Feature Manual References
2.19.1 Caller ID
1–31
0–30
Max. 8
digits (0–9,
*, and #)
Max. 8
digits (0–9,
*, and #)
Links
Value
Links
Range
Feature Manual
References
2.19.1 Caller ID
Feature Manual
References
2.19.1 Caller ID
Feature Manual
References
2.19.1 Caller ID
Feature Manual
References
2.19.1 Caller ID
PC Programming Manual 385