Panasonic KX-NS300 Pc Programming Manual page 436

12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings
Name
Automatic LCD
Switch when
Start Talking
Key Pad Tone
Automatic
Answer for CO
Call
Option 6
Name
Extension
Number
Extension Name
Forced
Automatic
Answer
Flexible Button
Programming
Mode
ICM Tone
436 PC Programming Manual
Description
Enables the first line of the display to
show the call duration automatically
after answering a trunk call.
Specifies whether key pad tones are
heard when dialling.
Enables the extension to answer an
incoming trunk call automatically after a
certain number of rings without going
off-hook, when Hands-free Answerback
has been set on the extension. This
setting is only effective when Forced
Automatic Answer on this screen has
been set to Off.
Description
Specifies the extension number of the
extension.
Specifies the name of the extension.
Specifies whether the extension
automatically answers all incoming calls
(both intercom and trunk calls) without
going off-hook, regardless of the Hands-
free Answerback setting.
Specifies whether the extension user
can modify all flexible buttons without
limitation, or only the One-touch Dialling
buttons. When the mode is set to One-
touch Dial, there is no need to enter "2"
before the number when customising a
One-touch Dialling button.
Selects the ring tone for incoming calls
arriving at the INTERCOM button or
PDN buttons. Note that the ring tone
specified here is applied to all PDN
buttons on an extension.
Value Range
Disable, Enable
Off, On
Disable, Enable
Value Range
Max. 5 digits (consisting
of 0–9)
Max. 20 characters
Off, On
No Limitation, One-
touch Dial
IP-PT (except
KX-NT265/KX-NT321):
1–30
KX-NT265/KX-NT321:
1–8 (Even if ring tone
9–30 is selected, ring
tone 1 is heard.)
Other telephones: 1–8
(Even if ring tone 9–30
is selected, ring tone 2
is heard.)
Links
Feature Manual
References
2.21.4 Display
Information
Feature Manual
References
2.4.4 Hands-free
Answerback
Links