Panasonic KX-NS300 Pc Programming Manual page 336

10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan—Main
Name
CLIR Set /
Cancel
Switch CLIP of
CO Line /
Extension
336 PC Programming Manual
Description
Specifies the feature
number used to set or
cancel CLIR, which
suppresses the
presentation of the caller's
number to the called party.
Specifies the feature
number used to send either
the CLIP number of the
trunk in use (subscriber's
number) or the extension to
the network.
Value Range
Max. 4 digits PC Programming Manual
(consisting of 0–
References
9, *, and #)
9.26 PBX Configuration—[1-1]
Configuration—Slot—Port
Property - BRI Port—
Supplementary Service—COLP,
CLIR, COLR, CNIP, CONP,
CNIR, CONR, CF (Rerouting),
CT, CCBS, AOC-D, AOC-E,
3PTY
9.27 PBX Configuration—[1-1]
Configuration—Slot—Port
Property - PRI Port—
Supplementary Service—COLP,
CLIR, COLR, CNIP, CONP,
CNIR, CONR, CF (Rerouting),
CT, CCBS, AOC-D, AOC-E,
E911, 3PTY
Feature Manual References
4.1.2.2 Calling/Connected Line
Identification Presentation (CLIP/
COLP)
4.3.4.2 Calling/Connected Line
Identification Presentation (CLIP/
COLP) and Calling/Connected
Name Identification Presentation
(CNIP/CONP)—by QSIG
Max. 4 digits PC Programming Manual
(consisting of 0–
References
9, *, and #)
9.26 PBX Configuration—[1-1]
Configuration—Slot—Port
Property - BRI Port—ISDN CO—
Subscriber Number
9.27 PBX Configuration—[1-1]
Configuration—Slot—Port
Property - PRI Port—CO Setting
—Subscriber Number
12.1.1 PBX Configuration—[4-1-1]
Extension—Wired Extension—
Extension Settings—CLIP—CLIP
ID
12.2.1 PBX Configuration—[4-2-1]
Extension—Portable Station—
Extension Settings—CLIP—CLIP
ID
Feature Manual References
4.1.2.2 Calling/Connected Line
Identification Presentation (CLIP/
COLP)
Links