Panasonic KX-NS300 Pc Programming Manual page 258

9.22 PBX Configuration—[1-1] Configuration—Slot—Port Property—Extension Type
9.22 PBX Configuration—[1-1] Configuration—Slot
—Port Property—Extension Type
Various settings can be programmed for each extension port.
To view the total number of each type of extension connected, click Port Type View.
The Shelf, Slot, and Port for each item are displayed for your reference. For details, see Common
Programming Reference Items in 9.1 PBX Configuration—[1-1] Configuration—Slot.
Note
Other programming items that are displayed on this screen but not listed below are used only when
programming extensions connected to an Expansion Unit.
For information about Expansion Units, see 9.33 PBX Configuration—[1-1] Configuration—Slot—
Expansion Unit1/Expansion Unit2/Expansion Unit3.
Name
Port Type Indicates the port type (reference only).
Telephone Indicates the connected telephone type
Type (reference only).
Connection Indicates the port status. To change the
status of the port, click the desired cell in
the column, and then select INS or OUS
for the port.
This option is only available in On-line
mode.
Extension Specifies the extension number of the
Number port.
Extension Specifies the extension name of the port.
Name
XDP Mode Turns XDP mode on or off for the port.
This setting is only available when Port
Type on this screen is set to S-Hybrid.
258 PC Programming Manual
Description Value Range
SLT/DPT/S-Hybrid/S-
Hybrid(S-DPT)/S-
Hybrid(SLT)/IP-EXT/
SIP-MLT/SIP/ISDN/UM
APT/DPT/DSS/VM/
ISDN-Extension/
IP-PT/UT/SIP/SIP-
CS/S-PS/CS/CS-M/CS-
S1/CS-S2/CS-S3/No
Connection/Unknown
INS: The port is in
service.
OUS: The port is out of
service.
Fault: The port is not
communicating with the
PBX.
Max. 5 digits
(consisting of 0–9)
Max. 20 characters
On: XDP enabled (The
main telephone and
sub telephone have
different extension
numbers. This is called
XDP Mode.)
Off: XDP disabled (The
main telephone and
sub telephone both
have the main
telephone's extension
number. This is called
Parallel Mode.)
Links
Feature Manual
References
2.11.10 Parallelled
Telephone
5.2.6 Extension
Port Configuration