Panasonic KX-NS300 Pc Programming Manual page 605

Name
Day, Night, Specifies the language of system
Lunch, and Break prompts used by this call service. If
Mode - Incoming set to "Primary", the default language
Call Service which is selected from all installed
Prompt languages will be used. When set to
"Selective", the caller can select the
language of his or her choice,
provided the System Administrator or
the Message Manager has recorded
the Multilingual Selection Menu. To
specify a Prompt Selection Number,
see 24.4 UM Configuration—[5-4]
System Parameters—Parameters—
Prompt Setting.
Note
Day, Night, Specifies which language is used
Lunch, and Break when a caller cannot enter any digits
Mode - Prompt to select a language after the
for No DTMF Multilingual Selection Menu has been
Input Callers played. If set to "Primary", the default
language which is selected from all
installed languages will be used.
Day, Night, Specifies whether the Unified
Lunch, and Break Messaging system answers calls on
Mode - Delayed the port or trunk immediately (0) or
Answer Time after a delay (1 s–60 s).
22.1 UM Configuration—[3-1] UM Extension / Trunk Service—Service Group
Description
If "Selective" is specified, you will
need to select a prompt available
for callers that cannot input DTMF
signals, such as rotary phone
callers. See "Prompt for No DTMF
Input Callers" below.
Value Range
Primary, PC Programming
Selective,
Manual
Guidance No. 1–8
References
24.4 UM
Configuration—[5-4]
System Parameters—
Parameters—Prompt
Setting—Primary
Language
Feature Manual
References
3.2.1.41 System
Prompts
PC Programming
Primary, Guidance
No. 1–8
Manual
References
24.4 UM
Configuration—[5-4]
System Parameters—
Parameters—Prompt
Setting—Primary
Language
Feature Manual
References
3.2.1.41 System
Prompts
0–60 s
PC Programming Manual
Links
605