Panasonic KX-NS300 Pc Programming Manual page 365

Name
CODEC—Priority Specifies whether the priority
Notification from notification from the SIP
SIP Network (for network is used in place of the
Incoming Call) PBX's codec priority for SIP
trunks.
ISDN en Bloc Specifies whether to
Dial—[#] as End automatically send "#" as an
of Dial for en Bloc end code when dialling to an
mode ISDN line; if used as the end
code, "#" will not be dialled
out as part of a number even
when the "#" key is pressed.
Redial— Selects whether Automatic
Automatic Redial Redial to an ISDN line is
when No Answer performed when the called
(ISDN) party does not answer within
a pre-programmed time
period.
Redial— Selects whether Automatic
Automatic Redial Redial to an analogue trunk is
for Analogue CO performed when the called
party does not answer within
a pre-programmed time
period.
Redial—Save Specifies whether any digits
Dial After dialled after the called party
Connection to answers (for example, to
Redial Memory access a specific extension
within another company) are
also saved as part of the
redial number.
Description
10.9 PBX Configuration—[2-9] System—System Options
Value Range
Enable, Disable
Enable, Disable PC Programming Manual
References
9.26 PBX Configuration—[1-1]
Configuration—Slot—Port
Property - BRI Port—ISDN CO
—ISDN Outgoing Call Type
9.27 PBX Configuration—[1-1]
Configuration—Slot—Port
Property - PRI Port—CO
Setting—ISDN Outgoing Call
Type
Feature Manual
References
4.1.2.1 Integrated Services
Digital Network (ISDN)—
SUMMARY
Disable, Enable PC Programming Manual
References
10.3 PBX Configuration—[2-3]
System—Timers & Counters—
Automatic Redial—Redial Call
Ring Duration (x10s)
Feature Manual
References
2.6.3 Last Number Redial
Enable, Disable PC Programming Manual
References
10.3 PBX Configuration—[2-3]
System—Timers & Counters—
Automatic Redial—Redial Call
Ring Duration (x10s)
Feature Manual
References
2.6.3 Last Number Redial
Enable, Disable Feature Manual
References
2.6.3 Last Number Redial
Links
PC Programming Manual 365