Panasonic KX-NS300 Pc Programming Manual page 576

20.1.2 UM Configuration—[1-2] Mailbox Settings—Full Setting
Name
Telephone
Device—
Device No. 1,
2, 3—Use
Mode
Telephone
Device—
Device
Notification
Timer—
Device Start
Delay Time
(0-120 min)
Telephone
Device—
Device
Notification
Timer—
Device
Interval Time
between
Device 1, 2, 3
and Next
Device
576 PC Programming Manual
Description
Specifies if and how each device is used for
message notification. The subscriber can also
specify the use mode from his or her telephone.
Schedule: If Scheduled is selected here, follow
the steps below to specify the time frame:
1.
Select a day from the Day drop-down list
(Sunday – Saturday).
2.
Click Enable Time Frame No. 1 or 2.
3.
Enter the start and end times in the Start
At (HH:MM) and End At (HH:MM) fields.
4.
Repeat steps 1 to 3 for each day to be
programmed, and then click OK.
Specifies the length of time the system waits
after a new message is received before sending
message waiting notification.
Specifies how long the PBX waits after sending
Message Waiting Notification to Device 1, 2, or
3 before sending notification to the next device.
Value Range
Not use: The Feature
selected device is
Manual
not used for
References
message
3.2.1.30
notification.
Message
Continuously:
Waiting
The device is
Notification—
called whenever
Telephone
a message is
Device
recorded in the
mailbox. If Only
Urgent
Messages is set
to "Yes", the
device is called
whenever an
urgent message
is recorded in the
mailbox.
Scheduled: The
selected device is
called only during
the selected
times.
0–120 min Feature
Manual
References
3.2.1.30
Message
Waiting
Notification—
Telephone
Device
0–120 min Feature
Manual
References
3.2.1.30
Message
Waiting
Notification—
Telephone
Device
Links