Panasonic KX-NS300 Pc Programming Manual page 221

Name
Maximum Bit Rate
DTMF
Payload Type
T38 FAX Max
Datagram
T38 FAX UDPTL
Error Correction –
Redundancy
T38 FAX UDPTL
Redundancy count
for T.30 messages
T38 FAX UDPTL
Redundancy count
for data
T38 FAX Rate
Management
Method
Timer
Name
T301 Specifies the maximum time that the PBX waits for a reply after
making a call.
T302 Specifies the maximum time allowed between each digit on an
incoming call. Applies to overlap receiving.
T303 Specifies the maximum time that the PBX waits for a reply after
sending the SETUP (call setting) message.
T304 Specifies the maximum time allowed between each digit on an
outgoing call. Applies to overlap sending.
T305 Specifies the maximum time that the PBX waits for a reply after
sending the DISC (disconnection) message.
T308 Specifies the maximum time that the PBX waits for a reply after
receiving the Release message.
T309 Specifies the length of time after which the PBX tries to disconnect
the data link, before disconnecting the call.
9.11 PBX Configuration—[1-1] Configuration—Slot—Shelf Property—V-IPGW
Description
Specifies the maximum bit rate of the
fax signal.
Specifies the type of DTMF tone to be
sent out.
Specifies the payload type for DTMF
tones using RFC2833. Programming
this parameter is only necessary if
DTMF is set to Outband (RFC2833).
Specifies the maximum datagram size
when using the T.38 protocol.
Specifies whether to enable the
redundancy feature when using the T.38
protocol.
Specifies the redundancy count for T.30
messages when using the T.38 protocol.
Specifies the redundancy count for data
when using the T.38 protocol.
Specifies the rate management method
when using the T.38 protocol.
Description
Value Range
No Speed Limit,
2400 bps, 4800
bps, 7200 bps,
9600 bps, 12000
bps, 14400 bps
Inband, Outband
(RFC2833),
Outband (H.245)
96–127
272–512
Disable, Enable
0–7
0–3
Transferred TCF,
Local TCF
Value Range
0–18000 × 100 ms
0–600 × 100 ms
0–600 × 100 ms
0–3000 × 100 ms
0–3000 × 100 ms
0–600 × 100 ms
0–3000 × 100 ms
PC Programming Manual
Links
Links
221