Panasonic KX-NS300 Pc Programming Manual page 533

17.4 PBX Configuration—[9-4] Private Network—
NDSS Key Table
Extensions at up to 7 other PBXs that will be monitored using Network Direct Station Selection (NDSS) can
be registered. A maximum of 250 extensions can be registered. To create an NDSS button to monitor an
extension, the extension must be registered here first.
To clear NDSS link data, click the NDSS Clear button. The NDSS Clear button can be used only in On-line
mode.
Note that the parameters on this screen can only be set when the Network Data Transmission for
Centralised Operator Feature—Network PBX ID is set to 1 in the 17.2 PBX Configuration—[9-2] Private
Network—Network Data Transmission screen.
Name
Network
Extension No.
Network
Extension Name
for Programming
Reference
Network PBX ID
of Network
Extension to be
monitored
Description
Specifies the number of the
remote extension (attached to
another PBX) that will be
monitored. The number input
here can use either Extension
Number Method or PBX Code
Method.
Specifies the name of the
network extension. This name
is only shown here, not on the
displays of extensions.
Indicates the Network Data
Transmission for Centralised
Operator Feature—Network
PBX ID of the PBX that the
extension is connected to
(reference only).
17.4 PBX Configuration—[9-4] Private Network—NDSS Key Table
Value Range
Max. 16 digits
(consisting of
0–9, *, and #)
Max. 20
characters
None, 1–8
Links
Feature Manual References
4.1 Public Network Features—
4.3.1 TIE Line Service
4.3.5.1 Network Direct Station
Selection (NDSS)
Feature Manual References
4.3.5.1 Network Direct Station
Selection (NDSS)
PC Programming Manual
References
17.2 PBX Configuration—[9-2]
Private Network—Network Data
Transmission—Network Data
Transmission for Centralised
Operator Feature—Network
PBX ID
Feature Manual References
4.3.5.1 Network Direct Station
Selection (NDSS)
PC Programming Manual 533