Panasonic KX-NS300 Pc Programming Manual page 50

2.3 Frequently Asked Questions (FAQ)
A •
From the 9.24 PBX Configuration—[1-1] Configuration—Slot—Port Property - LCO Port
screen, change the Dialling Mode setting of the target port to "DTMF" or "Pulse", as required.
Q How do I set disconnect detection (CPC Detection) for an analogue trunk?
A •
From the 9.24 PBX Configuration—[1-1] Configuration—Slot—Port Property - LCO Port
screen, modify the CPC Signal Detection Time—Outgoing, Incoming setting of the target port.
The required value varies by carrier. Transmission and reception can be set separately.
Q What settings do I change to enable use of an extension ISDN telephone?
A •
From the 9.26 PBX Configuration—[1-1] Configuration—Slot—Port Property - BRI Port
screen, set the Port Type of the port you want to use to "EXT".
Q How do I connect to another PBX using QSIG?
A •
From the 9.26 PBX Configuration—[1-1] Configuration—Slot—Port Property - BRI Port or
9.27 PBX Configuration—[1-1] Configuration—Slot—Port Property - PRI Port screen, set the
Port Type of the port you want to use to either "QSIG-Slave" or "QSIG-Master".
Q How do I edit a Class of Service, or create a new Class of Service?
•
A
Class of Service feature restrictions can be set from the 10.7.1 PBX Configuration—[2-7-1]
System—Class of Service—COS Settings screen.
Q How do I restrict calls between 2 extensions?
A •
Calls between extensions can be restricted from the 10.7.3 PBX Configuration—[2-7-3] System
—Class of Service—Internal Call Block screen. Click in the relevant cells to select the COS
levels whose extensions are blocked from calling each other.
Q How do I restrict trunk calls made by extensions?
A •
Trunk calls made by extensions can be restricted from the 10.7.2 PBX Configuration—[2-7-2]
System—Class of Service—External Call Block screen. Click in the relevant cells to select the
trunk groups that cannot be used by extensions associated with a particular COS in each time
mode.
To prevent extensions associated with a COS from making trunk calls, set all trunk groups for
that COS to "Block" (blue).
Q How do I modify the hold operation for SLTs?
•
A
It is possible to choose how to hold a line and transfer a call with an SLT using the SLT—SLT
Hold Mode option on the 10.9 PBX Configuration—[2-9] System—System Options screen.
For more details, see "2.13.1 Call Hold" of the Feature Manual.
Q How do I set up an Incoming Call Distribution (ICD) group to receive trunk calls directly?
50 PC Programming Manual