Panasonic KX-NS300 Pc Programming Manual page 296

9.32 PBX Configuration—[1-1] Configuration—Slot—Port Property—E1 Port
Name
CO Dial Mode
E1 Receiver
Type
Receive Digits
CPC
Detection
Time—Out, In
DTMF Width
Ringback
Tone to
Outside Caller
Dial Tone to
Extension
Answer Wait
Timer (*60s)
Pause Time
296 PC Programming Manual
Description
Selects the type of signal used to dial
out to a trunk.
If MFC-R2 is selected, the PBX (not
the telephone company) sends a dial
tone to the caller when making a
trunk call using an E1 line.
Selects the type of signal the PBX
receives from the E1 line.
This should be set to MFC-R2 when
receiving ANI (Automatic Number
Identification) numbers from the E1
line.
Specifies the maximum number of
digits to be received from a DDI/DID
number when receiving a call with the
DDI/DID number.
Specifies the length of time required
by the PBX to detect a CPC signal on
outgoing or incoming trunk calls
before disconnecting the line. When
None is selected here, the line will
not be disconnected when a CPC
signal is not detected.
Selects the length of the DTMF tone
sent to the E1 channel.
Enables the PBX to send a ringback
tone to an outside caller when the
network cannot send the tone.
Enables the PBX to send a dial tone
to an extension making a call when
the network cannot send the tone.
Selects the length of time that the
PBX waits for the called outside party
to answer an outgoing trunk call. The
line will be disconnected
automatically when this timer expires.
Specifies the length of a pause.
Value Range
DTMF, MFC-R2
DTMF, MFC-R2,
Undefined
0–15
None, 80 x n (n=2–75)
ms
80 ms, 160 ms
Disable, Enable
Disable, Enable
None, 1–4
1.5 s, 2.5 s, 3.5 s, 4.5 s
Links
Feature Manual
References
2.5.4.4 Dial Type
Selection
2.29.1 E1 Line
Service
Feature Manual
References
2.29.1 E1 Line
Service
Feature Manual
References
2.11.9 Calling Party
Control (CPC)
Signal Detection
Feature Manual
References
2.5.4.7 Pause
Insertion
2.5.4.8 Host PBX
Access Code
(Access Code to the
Telephone Company
from a Host PBX)
2.5.4.9 Special
Carrier Access Code