Panasonic KX-NS300 Pc Programming Manual page 172

9.2.2 PBX Configuration—[1-1] Configuration—Slot—System Property—Site
Name
T38 FAX Transmit Level
Mu-Law - SIP Extension
Port Number
Name
Voice (RTP) UDP
Port No. (Server)
Voice (RTP) UDP
Port No. (IP-PT /
SIP-MLT)
UDP Port No. for SIP
Extension Server
TLS Port No. for SIP
Extension Server
172 PC Programming Manual
Description
Specifies the transmission level of G3 fax
signals after being converted from T.38
protocol packets, when the codec used is
G.711Mu for SIP extensions.
Description
Specifies the UDP port used by the
system to transmit and receive RTP
(Real-time Transfer Protocol) data.
This must be changed if another
network application is using the same
port.
For voice communications, the system
uses 128 contiguous UDP ports,
starting from the port number specified
here.
Specifies the UDP port used to
transmit and receive RTP (Real-time
Transfer Protocol) data on the IP-PT
side. This must be changed if another
network application is using the same
port.
For voice communications, an IP-PT
uses 128 contiguous UDP ports,
starting from the port number specified
here.
To change the value displayed here,
click Common Settings and set the
desired value.
Specifies the UDP port number used
for the SIP Extension server.
To change the value displayed here,
click Common Settings and set the
desired value.
Specifies the TLS port number used
by the SIP extension server.
Value
Range
-7–8 dB
Value
Range
1024– Feature Manual
64000
References
5.2.1 IP Proprietary
Telephone (IP-PT)
1024– Feature Manual
65535
References
5.2.1 IP Proprietary
Telephone (IP-PT)
1024– Feature Manual
65535
References
5.2.2 SIP (Session
Initiation Protocol)
Extension
1024– Feature Manual
65535
References
5.2.2.5 SIP-TLS
Links
Links