Panasonic KX-NS300 Pc Programming Manual page 561

19.3.2 PBX Configuration—[11-3-2] Maintenance—CS Synchronisation—LAN Synchronisation
2.
Click Add.
A dialogue box will appear. Non-registered (available) CSs are displayed on the left.
3.
Highlight CSs and click the right arrow to select them for addition.
4.
Click OK.
Deleting CSs
Follow the steps below to delete CSs from the LAN synchronisation group.
1.
Click Delete.
A dialogue box will appear. Registered CSs are displayed on the left.
2.
Highlight CSs and click the right arrow to select them for deletion.
3.
Click OK.
Name
LAN Select the LAN synchronisation
Synchronisation group to programme.
Group Number
Note
IP Address for Specifies the IP address for the
Group Control group. This is the same value
specified in Group Control
Setting—IP Address for Group
Control in 19.3.3 PBX
Configuration—[11-3-3]
Maintenance—CS
Synchronisation—LAN Sync
Group Setting.
Index Indicates the CS number
(reference only).
CS Name Indicates the name of the CS
(reference only).
Connection Indicates the port status. To
change the status of the port, click
the desired cell in the column, and
then select INS or OUS for the
port.
Status Indicates whether a certain CS is
registered (reference only).
Description
You must specify a LAN
synchronisation group number
or an air synchronisation
group number for each IP-CS.
Do not leave both of these
settings unspecified.
Value Range
1–4
239.0.0.0–
239.255.255.255
1–32
Max. 20 characters
INS: The port is in service.
OUS: The port is out of
service.
Fault: The port is not
communicating with the
network.
-, Registered
PC Programming Manual
Links
PC
Programming
Manual
References
19.3.1 PBX
Configuration—
[11-3-1]
Maintenance—
CS
Synchronisation
—Air
Synchronisation
—Air
Synchronisation
Group Number
561