Panasonic KX-NS300 Pc Programming Manual page 32

1.2.2 PC Programming Using Off-line Mode
Options
You can specify the display language of the Programme Launcher, as well as set the web server port
number for Off-line Web Maintenance Console. In the Programme Launcher, click Options and change the
settings as necessary.
Adding Additional Languages
Additional display language files may be made available. To add a display language not listed in the
language selection menu, select Additional language, and then click Browse to specify the language file.
After specifying a language file, click OK to change to the selected language.
VoIP Test Tool
Click the VoIP Test Tool button to launch the VoIP Test Tool. This tool is identical to the VoIP Test Tool
included with the Unified PC Maintenance Console for KX-TDA/KX-TDE/KX-NCP PBXs.
IP Terminal Utility
Click the IP Terminal button to launch the IP Terminal setup utility. This utility is identical to the IP Terminal
utility included with the Unified PC Maintenance Console for KX-TDA/KX-TDE/KX-NCP PBXs.
IP Trace File Converter
Click the IP Trace File Converter button to launch the IP Trace File Converter utility. This utility will convert
locally-saved IP trace file data collected by the system utilities listed below into a format that can be
analysed by general packet analysis software tools.
–
7.4.2 Utility—Monitor/Trace—V-IPGW Protocol Trace
–
7.4.3 Utility—Monitor/Trace—V-SIPGW Protocol Trace
Others
Others is a tool used to edit files saved by using the Export tool. Copy files from the Others folder to edit
them. After saving edited files, import them to the PBX.
The following types of data types can be edited.
•
Feature – Speed Dial and Caller ID
•
Incoming Call – DDI/DID Table
•
Wired Extension
•
PS Extension
For details, see "6.6 Tool—Import" and "6.7 Tool—Export".
Programming in Off-line Mode
Once you have logged in to Off-line Web Maintenance Console, programming is very similar to On-line
mode. The title bar will be coloured differently from when in On-line mode:
When programming in On-line mode:
When programming in Off-line mode:
Some items are not programmable when in Off-line mode, and those items will be greyed out. Some tools
and utilities are also not available in Off-line mode. For details, refer to 2.1.2 Access Levels.
32 PC Programming Manual